FEATURES Horizontal Basket Peeler Centrifuges are successfully used in Pharmaceutical, Plastic, Organic & Inorganic Chemicals Industry for separating solids from solidl iquid slurry with 5 to 50% SOLIDS contents and particle size ranging from 2 MIRCRONS TO 10 MM. Products which are difficult to filter or decant can be easily separated using Peeler centrifuge. The unique feature of Horizontal Peeler Centrifuge is the constant basket speed i.e. all operations like Feeding, Drying, Discharging etc. are carried out at full-basket-speed. The sequence of operations can be (either semi or fully automati-cally) controlled by Electro-hydraulic control panel. STANDARD MODELS

Model No.	63H0.5	80H 0.9	100H 1.0	120H 1.5	140H 3.1	170H 4.1	210H 7.0
Basket Size (mm)	630	800	1000	1200	1400	1750	2100
Basket Speed (rpm.)-Max.	1440	1200	1200	1050	1000	900	760
Separation Effect--G" Value	730	640	800	735	790	790	700
Drive H.P.	15	25	40	75	100	125	200
Basket Volume (ltrs.)	36	70	110	180	450	750	1400
Filteration Area (sqm.)	0.5	0.9	1.1	1.50	3.1	4.1	7.0

The PEELER Centrifuge is also offered in GMP Execution with, (1) All parts From Stainless Steel - SS 304 or SS 316. (2) All Parts are ground smooth to 180 grit size to avoid accumulation of solids. All SS Parts are welded by TIG Welding process. The Parts not being from SS are epoxy painted. They are offered in Vapour tight / Air tight execution, with Nitrogen Purging/Blanketting and Safety interlocks in Explosion/Flame Proof execution. TYPICAL BATCH CYCLE 1. FEEDING The Suspension is fed from the storage tank to the basket rotating at full operational speed. 2. DRYING Under the influence of the centrifugal force the liq-uid is drained from the solids, through filter ele-ments (usually filter cloth). The solids are collected as 'cake' in the basket. 3. WASHING If required, in order to remove the traces of mother liquor washing facility can be provided to thoroughly wash the solids during separation. 4. RE-DRYING After giving wash or other treatment soilds are further allowed to dry. 5. DISCHARGING Solids are 'peeled' off by means of full-basket-width scrapper and is dis-charged through chute in front cover of the machine or conveyed out by discharge screw. 6. HEEL REMOVAL The residual heel is removaed by airjet or water / liquid jet to ex-pose filter cloth before next cycle.

more...
balloon padders